dmesg - Intel Core i7 640L
microcode: microcode updated early to revision 0x7, date = 2018-04-23
Linux version 4.15.0-118-generic (buildd@lgw01-amd64-039) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #119-Ubuntu SMP Tue Sep 8 12:30:01 UTC 2020 (Ubuntu 4.15.0-118.119-generic 4.15.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bafc1fff] usable
BIOS-e820: [mem 0x00000000bafc2000-0x00000000bb6c1fff] reserved
BIOS-e820: [mem 0x00000000bb6c2000-0x00000000bb7c1fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb7c2000-0x00000000bb7fefff] ACPI data
BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP EliteBook 2540p/7008, BIOS 68CSU Ver. F.08 11/24/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 100000000 mask FC0000000 write-back
5 base 138000000 mask FF8000000 uncachable
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
RAMDISK: [mem 0x3348f000-0x35a3efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FDDC0 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BB7FE120 000084 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 HPQOEM 7008 0000000F HP 00000001)
ACPI: DSDT 0x00000000BB7D6000 020136 (v02 HPQOEM 7008 00000001 INTL 20060912)
ACPI: FACS 0x00000000BB760000 000040
ACPI: FACS 0x00000000BB760000 000040
ACPI: HPET 0x00000000BB7FB000 000038 (v01 HPQOEM 7008 00000001 HP 00000001)
ACPI: APIC 0x00000000BB7FA000 0000BC (v01 HPQOEM 7008 00000001 HP 00000001)
ACPI: MCFG 0x00000000BB7F9000 00003C (v01 HPQOEM 7008 00000001 HP 00000001)
ACPI: TCPA 0x00000000BB7F7000 000032 (v02 HPQOEM 7008 00000000 HP 00000001)
ACPI: SSDT 0x00000000BB7D3000 000135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 0x00000000BB7D2000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 0x00000000BB7D1000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 0x00000000BB7D0000 000A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BB7CF000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BB7CE000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: ASF! 0x00000000BB7F8000 0000A0 (v32 HPQOEM 7008 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
NODE_DATA(0) allocated [mem 0x137fd2000-0x137ffcfff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000137ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000bafc1fff]
node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
node 0: [mem 0x0000000100000000-0x0000000137ffffff]
Reserved but unavailable: 98 pages
Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
On node 0 totalpages: 995169
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11904 pages used for memmap
DMA32 zone: 761795 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 229376 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbafc2000-0xbb6c1fff]
PM: Registered nosave memory: [mem 0xbb6c2000-0xbb7c1fff]
PM: Registered nosave memory: [mem 0xbb7c2000-0xbb7fefff]
PM: Registered nosave memory: [mem 0xbb800000-0xbbffffff]
PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x500 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 979596
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3782588K/3980676K available (12300K kernel code, 2482K rwdata, 4272K rodata, 2436K init, 2724K bss, 198088K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39396 entries in 154 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 6 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2128.055 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.11 BogoMIPS (lpj=8512220)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Core(TM) i7 CPU L 640 @ 2.13GHz (family: 0x6, model: 0x25, stepping: 0x5)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
MDS CPU bug present and SMT on, data leak possible. See for more details.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 4 processors activated (17024.44 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb6c2000-0xbb7c1fff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:45:29, date: 10/07/20
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1602081929.156:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF961F32BF8800 000375 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF961F33545000 0008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF961F32BFE400 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF961F32B62600 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 3F
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (on)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5058-0x505f]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd4724000-0xd472400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x5050-0x5057]
pci 0000:00:16.3: reg 0x14: [mem 0xd472b000-0xd472bfff]
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd472a000-0xd472afff]
pci 0000:00:19.0: reg 0x18: [io 0x5020-0x503f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd4729000-0xd47293ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4720000-0xd4723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd4728000-0xd47283ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
pci 0000:00:1f.2: reg 0x14: [io 0x5064-0x5067]
pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
pci 0000:00:1f.2: reg 0x1c: [io 0x5060-0x5063]
pci 0000:00:1f.2: reg 0x20: [io 0x5000-0x501f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4727000-0xd47277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xd4726000-0xd4726fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-42]
pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd45fffff]
pci 0000:43:00.0: [8086:4239] type 00 class 0x028000
pci 0000:43:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
pci 0000:43:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 43]
pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:44:06.0: [1180:0832] type 00 class 0x0c0010
pci 0000:44:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:44:06.0: MMC cards are now supported by standard SDHCI controller
pci 0000:44:06.0: reg 0x10: [mem 0xd0401000-0xd04017ff]
pci 0000:44:06.0: supports D1 D2
pci 0000:44:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:44:06.1: [1180:0822] type 00 class 0x080500
pci 0000:44:06.1: reg 0x10: [mem 0xd0403000-0xd04030ff]
pci 0000:44:06.1: supports D1 D2
pci 0000:44:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:44:06.2: [1180:0476] type 02 class 0x060700
pci 0000:44:06.2: reg 0x10: [mem 0xd0400000-0xd0400fff]
pci 0000:44:06.2: supports D1 D2
pci 0000:44:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 44-45] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
pci_bus 0000:45: busn_res: [bus 45] end can not be updated to 48
pci 0000:00:1e.0: bridge has subordinate 45 but max busn 48
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbafc2000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xd4800000-0xd4800fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [io 0x0200-0x027f] has been reserved
system 00:02: [io 0x1000-0x100f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0xef80-0xef9f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN016c SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000 add_align 100000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4900000-0xd4afffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-42]
pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd45fffff]
pci 0000:00:1c.1: bridge window [mem 0xd4900000-0xd4afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 43]
pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:44:06.2: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
pci 0000:44:06.2: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
pci 0000:44:06.2: BAR 13: assigned [io 0x2000-0x20ff]
pci 0000:44:06.2: BAR 14: assigned [io 0x2400-0x24ff]
pci 0000:44:06.2: CardBus bridge to [bus 45]
pci 0000:44:06.2: bridge window [io 0x2000-0x20ff]
pci 0000:44:06.2: bridge window [io 0x2400-0x24ff]
pci 0000:44:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
pci 0000:44:06.2: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:1e.0: PCI bridge to [bus 44-45]
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd45fffff]
pci_bus 0000:02: resource 2 [mem 0xd4900000-0xd4afffff 64bit pref]
pci_bus 0000:43: resource 1 [mem 0xd0500000-0xd05fffff]
pci_bus 0000:44: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:44: resource 1 [mem 0xd0400000-0xd04fffff]
pci_bus 0000:44: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:44: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:44: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:44: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:44: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:44: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:45: resource 0 [io 0x2000-0x20ff]
pci_bus 0000:45: resource 1 [io 0x2400-0x24ff]
pci_bus 0000:45: resource 2 [mem 0xd8000000-0xdbffffff pref]
pci_bus 0000:45: resource 3 [mem 0xdc000000-0xdfffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 38592K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xb6fc2000-0xbafc2000] (64MB)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.1: Signaling PME with IRQ 25
pcieport 0000:00:1c.3: Signaling PME with IRQ 26
pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 4032k, total 4032k
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [EXTZ] (0 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [EX2Z] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [PWMZ] (11 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (20 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [BATZ] (21 C)
thermal LNXTHERM:06: registered as thermal_zone6
ACPI: Thermal Zone [EGXZ] (0 C)
thermal LNXTHERM:07: registered as thermal_zone7
ACPI: Thermal Zone [CPUZ] (39 C)
thermal LNXTHERM:08: registered as thermal_zone8
ACPI: Thermal Zone [MCHZ] (33 C)
thermal LNXTHERM:09: registered as thermal_zone9
ACPI: Thermal Zone [PCHZ] (59 C)
0000:00:16.3: ttyS4 at I/O 0x5050 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: TPM is disabled/deactivated (0x7)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4729000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-118-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4728000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-118-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 9 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x20655, pf=0x10, revision=0x7
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1533310306, 0)->(1523020402, 10289904)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 12f2d460e247d21dc5d156478bb7d4abc0f5a070'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ima: No TPM chip found, activating TPM-bypass! (rc=7)
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
Magic number: 8:271:788
rtc_cmos 00:03: setting system clock to 2020-10-07 14:45:30 UTC (1602081930)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel image memory: 2436K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1872K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x26 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
sdhci-pci 0000:44:06.1: SDHCI controller found [1180:0822] (rev 25)
sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:44:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:44:06.1] using DMA
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727200 irq 27
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727380 irq 27
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
firewire_ohci 0000:44:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:b5:99:f1:3d:76
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: unexpected _GTF length (8)
ata2.00: ATA-8: ST9320325AS, 0005HPM1, max UDMA/100
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: unexpected _GTF length (8)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA ST9320325AS HPM1 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2127.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac822addd, max_idle_ns: 440795285886 ns
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 2-1.4: new full-speed USB device number 3 using ehci-pci
firewire_core 0000:44:06.0: created device fw0: GUID 5566778811223344, S400
random: fast init done
usb 1-1.1: New USB device found, idVendor=03f0, idProduct=231d
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: HP Integrated Module
usb 1-1.1: Manufacturer: Broadcom Corp
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usb 2-1.4: New USB device found, idVendor=046d, idProduct=c534
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Receiver
usb 2-1.4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
ata3: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C534.0001/input/input12
usb 1-1.5: new high-speed USB device number 4 using ehci-pci
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C534.0002/input/input13
psmouse serio4: synaptics: queried max coordinates: x [..5808], y [..5372]
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 607760
usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b163
usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.5: Product: HP Webcam [2 MP Macro]
usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-1.5: SerialNumber: SN0001
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
ata6: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Slices.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[272]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 18, expected 21)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:43:00.0: can't disable ASPM; OS doesn't have ASPM control
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
iwlwifi 0000:43:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
iwlwifi 0000:43:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
iwlwifi 0000:43:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
yenta_cardbus 0000:44:06.2: CardBus bridge found [103c:7008]
SSE version of gcm_enc/dec engaged.
yenta_cardbus 0000:44:06.2: ISA IRQ mask 0x0cb8, PCI irq 22
yenta_cardbus 0000:44:06.2: Socket status: 30000810
yenta_cardbus 0000:44:06.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
yenta_cardbus 0000:44:06.2: pcmcia: parent PCI bridge window: [mem 0xd0400000-0xd04fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0400000-0xd04fffff:
excluding 0xd0400000-0xd040ffff
iwlwifi 0000:43:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:43:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:43:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:43:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
pci 0000:00:00.0: Intel HD Graphics Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 32768K stolen memory
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 3f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
------------[ cut here ]------------
Could not determine valid watermarks for inherited state
WARNING: CPU: 1 PID: 332 at /build/linux-eWb6zI/linux-4.15.0/drivers/gpu/drm/i915/intel_display.c:14537 intel_modeset_init+0xfcf/0x1010 [i915]
Modules linked in: ecdh_generic iwldvm(+) mac80211 snd_seq_midi_event pcbc aesni_intel i915(+) yenta_socket aes_x86_64 crypto_simd glue_helper pcmcia_rsrc cryptd snd_rawmidi intel_cstate drm_kms_helper pcmcia_core snd_seq snd_seq_device hp_accel joydev drm snd_timer input_leds lis3lv02d snd i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt serio_raw iwlwifi input_polldev soundcore cfg80211 mac_hid shpchp wmi mei_me mei tpm_infineon lpc_ich video intel_ips sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid e1000e firewire_ohci psmouse sdhci_pci ahci sdhci firewire_core ptp libahci crc_itu_t pps_core
CPU: 1 PID: 332 Comm: systemd-udevd Not tainted 4.15.0-118-generic #119-Ubuntu
Hardware name: Hewlett-Packard HP EliteBook 2540p/7008, BIOS 68CSU Ver. F.08 11/24/2010
RIP: 0010:intel_modeset_init+0xfcf/0x1010 [i915]
RSP: 0018:ffffaf108107f9b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff961f2fd40000 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff961f37c56490
RBP: ffffaf108107fa40 R08: 0000000000000329 R09: 0000000000000004
R10: 0000000000000040 R11: 0000000000000001 R12: ffff961f2fef3000
R13: ffff961f30160800 R14: 00000000ffffffea R15: ffff961f2fd40358
FS: 00007f398dbfa680(0000) GS:ffff961f37c40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fdba776cf0 CR3: 000000012efd4006 CR4: 00000000000206e0
Call Trace:
i915_driver_load+0xa73/0xe60 [i915]
i915_pci_probe+0x42/0x70 [i915]
local_pci_probe+0x47/0xa0
pci_device_probe+0x10e/0x1c0
driver_probe_device+0x30c/0x4a0
__driver_attach+0xcc/0xf0
? driver_probe_device+0x4a0/0x4a0
bus_for_each_dev+0x70/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x1c7/0x270
? 0xffffffffc0960000
driver_register+0x60/0xe0
? 0xffffffffc0960000
__pci_register_driver+0x5a/0x60
i915_init+0x5c/0x5f [i915]
do_one_initcall+0x52/0x19f
? __vunmap+0xb5/0xe0
? _cond_resched+0x19/0x40
? kmem_cache_alloc_trace+0x167/0x1d0
? do_init_module+0x27/0x213
do_init_module+0x5f/0x213
load_module+0x16bd/0x1f20
? ima_post_read_file+0x96/0xa0
SYSC_finit_module+0xfc/0x120
? SYSC_finit_module+0xfc/0x120
SyS_finit_module+0xe/0x10
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x41/0xa6
RIP: 0033:0x7f398d71d959
RSP: 002b:00007fff0c0b1a98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 00005638862e2da0 RCX: 00007f398d71d959
RDX: 0000000000000000 RSI: 00007f398d3fc105 RDI: 0000000000000015
RBP: 00007f398d3fc105 R08: 0000000000000000 R09: 00007fff0c0b1bb0
R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000000000
R13: 00005638862d4810 R14: 0000000000020000 R15: 00005638862e2da0
Code: e9 46 fc ff ff 48 c7 c6 f7 ed 8e c0 48 c7 c7 4f e1 8e c0 e8 64 d7 62 fd 0f 0b e9 73 fe ff ff 48 c7 c7 40 46 90 c0 e8 51 d7 62 fd 0b e9 4b fe ff ff 48 c7 c6 04 ee 8e c0 48 c7 c7 4f e1 8e c0
---[ end trace 9b44c6d8c8ff18c2 ]---
[drm] RC6 disabled, disabling runtime PM support
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0d: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usbcore: registered new interface driver btusb
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0410000-0xd04fffff:
excluding 0xd04fe000-0xd050bfff
pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
iwlwifi 0000:43:00.0 wlo1: renamed from wlan0
input: HP WMI hotkeys as /devices/virtual/input/input16
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
scsi host6: pata_pcmcia
ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
media: Linux media interface: v0.10
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b163)
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B3X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Mic=0xb
snd_hda_codec_idt hdaudioC0D0: Line=0xe
uvcvideo 1-1.5:1.0: Entity type for entity Extension 5 was not initialized!
uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.5:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
input: HP Webcam [2 MP Macro]: HP Webc as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
audit: type=1400 audit(1602081964.820:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1602081964.820:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1602081964.820:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1602081964.852:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1602081964.888:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=892 comm="apparmor_parser"
audit: type=1400 audit(1602081964.988:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=887 comm="apparmor_parser"
audit: type=1400 audit(1602081964.988:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
audit: type=1400 audit(1602081964.988:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=887 comm="apparmor_parser"
audit: type=1400 audit(1602081964.988:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
audit: type=1400 audit(1602081965.056:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=894 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
iwlwifi 0000:43:00.0: Radio type=0x1-0x3-0x1
iwlwifi 0000:43:00.0: Radio type=0x1-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
wlo1: authenticate with d0:ef:c1:43:c7:2c
wlo1: send auth to d0:ef:c1:43:c7:2c (try 1/3)
wlo1: authenticated
wlo1: waiting for beacon from d0:ef:c1:43:c7:2c
wlo1: associate with d0:ef:c1:43:c7:2c (try 1/3)
wlo1: RX AssocResp from d0:ef:c1:43:c7:2c (capab=0x1431 status=0 aid=5)
wlo1: associated
wlo1: Limiting TX power to 26 (26 - 0) dBm as advertised by d0:ef:c1:43:c7:2c
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3150 > 3148), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3938 > 3937), lowering kernel.perf_event_max_sample_rate to 50750
perf: interrupt took too long (4929 > 4922), lowering kernel.perf_event_max_sample_rate to 40500